Low Prices & Product Reviews

Pressure Pro E4040HG Professional 4000 PSI Gas Pressure Washer has revolutionary aircraft grade aluminum frame with dual handles. It has a Honda GX390 engine and can push 4 gallons per minute. The 50 mesh inlet filter protects the engine from any unwanted dirt and has an easy to adjust pressure unloader and a low oil indicator shut down. The pneumatic tires are great for any Pressure Pro E4040HG surface with dual padded shock absorbing feet. The commercial grade engines provide long lasting run time and includes a thermo sensor to prevent overheating the unit.

4204-1 Model Code: AB (part# 4204-1) This item features: -Automatic base/chip de-mag. -Forward/reverse control. -Base control panel includes variable speed adjustment for motor. -Feedback speed control. -Computer controlled reverse. -Solid state electronic switching. -Automatic electronic soft start. -Motor/magnet interlock. -Full wave magnetic holding power. -Line lock-out prevents operation should voltage be restored to Milwaukee 4204-1 an interrupted line when switch is locked ”on.”. -For any flat ferrous material 1/2” and thicker. -Bit/Blade Mounting Size Symbol: Morse #3. -Voltage: 120.00 VAC. -Frequency: 60.0 Hz. -Type: Portable Drill Press. -Price is for 1 Each. Testing and approvals: -Complies with OSHA and UL requirements. Model Code Model Description AACutting Cap.:1 1/4 in (steel) [Max], Speed:250 rpm [Max], Control Type:Electronic Variable/Reverse; Adjustable – 2 Speed, Amps:12.50 A, Drill Point Pressure:1600.000 lb, Stroke Length:11 in, Chuck to Base Distance:1 13/16 in [Min], 4 11/16 in [Max], Base Type:Fixed, Wt.:72 lb ABCutting Cap.:1/2 in (steel) [Max], Speed:600 rpm [Max], Control Type:Electronic Variable/Reverse; Adjustable, Amps:7.20 A, Drill Point Pressure:1650.000 lb, Stroke Length:11 in, Chuck to Base Distance:31/32 in [Min], 1 23/32 in [Max], Base Type:Adjustable, Wt.:57 lb ACCutting Cap.:3/4 in (steel) [Max], Speed:350 rpm [Max], Control Type:Electronic Variable/Reverse; Adjustable, Amps:12.50 A, Drill Point Pressure:1630.000 lb, Stroke Length:9 in, Chuck to Base Distance:1 23/32 in [Min], 4 11/16 in [Max], Base Type:Fixed, Wt.:72 lb ADCutting Cap.:3/4 in (steel) [Max], Speed:350 rpm [Max], Control Type:Electronic Variable/Reverse; Adjustable, Amps:12.50 A, Drill Point Pressure:1670.000 lb, Stroke Length:11 in, Chuck to Base Distance:1 3/8 in [Min], 5 3/32 in [Max], Base Type:Adjustable, Wt.:70 lb

Miller 907460 Diversion 180 AC/DC TIG WelderPart # 907460Miller Diversion 180 Features: Easy-to-understand operatorinterface.1. Power-up2. Select material type3. Set material thickness rangethen weld! Its as easy as 1, 2, 3.Inverter-based, AC/DC powersource provides a more consistent welding arc while using less power. Portable. Whether its in the shop, garage or at the race track, at 50 lb they can be taken anywhere.Diversion 180 includes RFCS-RJ45remote foot control and a multi-voltage plug (MVP) which allows connection to 115 or 230 V receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord.HF start for non-contact arc starting that eliminates tungsten and materialcontamination.Fan-On-Demand reduces noiseand maintenance by lessening theamount of airborne contaminantspulled through the machine, whilesufficiently cooling thermallyprotected internal components.Portable. Whether its in the shop,garage or at the race track, at 50 lbthey can be taken anywhere.Auto-Postflow protects the weldend zone and electrode byoptimizing post flow time basedon welding amperage.Advanced Squarewave AC providesa fast freezing weld puddle anddeeper penetration.Miller Diversion 180 Specifications:Diversion 180 Input Power:115 and 230V, Single Phase PowerDiversion 180 Rated Output:150A at 16V, 20% Duty Cycle Diversion 180 Welding Amperage Range:115V: 10-125A Miller 907460 AC/DC230V: 10-180A AC/DCDiversion 180 Max. Open-Circuit Voltage:80Diversion 180 Net Weight:50 Lbs (23 kg)

At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states – CA, CT, HI, LA, MA, MD, MS, RI and TN.  If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region.

This knee mill is great for the small shop that wants a compact unit! It features a 1-1/2 HP motor with 9 speeds ranging from 240 to 2760 RPM. A variable speed power SHOP FOX M1001 feed with rapid override efficiently moves the 6-1/8 x 26-inch table back and forth along its 15-7/8-inch travel. Both the head and column rotate 45° in both directions. A single shot lubrication system makes maintenance quick and easy!

Features:

* High precision-ground vertical and cross ways
* Class 7 spindle bearings
* Milling head micro-feed
* Head tilts to 45° both ways. 90° rotation on horizontal surface
* Built-in work light
* Built-in coolant pump

Specifications:

* Motor Size: 1-1/2 HP, 110V, single-phase, TEFC
* Spindle Taper: R-8
* Spindle Travel: 3-Inches
* Max. Distance Spindle to Table: 12-1/2-Inches
* T-Slots: 3 on 1-9/16-Inch Centers, 3/8-Inch Studs
* Table Size: 6-1/8 x 26-Inches
* Table Travel (Longitudinal): 15-5/8-Inches
* Table Travel (Cross): 6-Inches
* Max. Drilling Capacity for Cast Iron: 1-Inch
* Max. Drilling Capacity for Steel: 3/4-Inch
* Head Tilt: 45° R & L<

Hitachi H65SD2 H65SD2 The H65SD2 Demolition Hammer is ideal for demolishing concrete, groove and channel digging in concrete, asphalt and gravel, tamping or compacting asphalt and gravel roads, cutting asphalt, construction work, piping and wiring work and water supply and drain work. Features: -Best in class 31 ft / lbs of impact energy-50pct more than competitive hammers in the category. -Powerful 10.8 Amp (1, 240 W input) motor. -Impressive impact rate of 1, 400 bpm for rapid results. -Low noise level, full-load only 104 dB. -Low vibration levels (full-load vibration level of only 19.9 m / s2) for less fatigue with continuous use. -Elastomer grip reduces vibration transfer while providing a secure hold for added safety. -Cushioned auxiliary handle that rotates 360 is located between the body of the tool and the bit cylinder to provide optimal control and grip on the tool. -Universal tool retainer accepts 3 types of 1-1/8” hex shank bits; standard hex, collarless retaining groove and air tool bits. -Hitachi’s patented IDI (Internal Double Insulation) Technology significantly strengthens the body of the tool. -Metal-seated armature bearing to reduce the effects of vibration and heat on motor performance. -Auto-stop brushes prevent unnecessary maintenance issues. -Lock-on trigger for comfortable extended use. -Sealed lubrication to prevent grease from leaking out and dust from creeping in and damaging the internals. -Impressive power to weight ratio for balanced and comfortable operation. Includes: -Steel Case. -6mm Hex Bar Wrench. -3mm Hex Bar Wrench. Specifications

Serious woodworkers will love the durable, stable, heavy cast iron platform of the 14-by-42-inch Jet 1442 Lathe. The 1 HP, 115-volt, single phase, 8-speed drive motor can be used right out of the box without having to add expensive high voltage circuits. The large capacity, 42 inches between centers, allows for the turning of up to 14-inch pieces of heavy stock. In addition to the 4-inch ram travel, the movable head slides effortlessly along the full length of the bed locking in any position required by the user. The head can be rotated 180 degrees for turning bowls or blanks larger than 14 inches. The variable speed drive motor can be adjusted in 8 different positions to provide speeds ranging from 450 JET 708358K JWL-1442VSK to 3000 RPM. The operator can easily set the proper speed whether roughing, general cutting, or sanding. There is also an adjustable tool rest, which can be extended for turning bowls. Weighing in at around 200 pounds, the Jet 1442 lathe will stay balanced and in place no matter how large the project. I’m sure you’ll be amazed at just how quiet and how well balanced the 1442 is. –C. Dwight Barnett

The DELTA 32-325 3/4 HP, 13-spindle line boring machine handles small and large workpieces with ease. The indexing pins help to maintain correct spindle alignment for extra-long materials, and the large 16 x 29-3.4-inch table provides 12 inches of work space in front of the boring head for larger boards. Parallel boring DELTA 32-325 patterns are a cinch with the 32-325 thanks to its strategically-placed work stops on either end of the fence. The powerful 3/4 HP motor provides 1,725 RPM to the 13-spindle boring head which is plenty of power for even the hardest of laminates. This high performance boring machine is also durable and built to last. The support structure is made from heavy-gauge steel and has a sturdy steel base with mounting holes for bench or stand mounting.

The New and Improved 2 HP cyclone has more features and more performance. The most compact cyclone dust collector on the market is now shorter with a smaller footprint and portable!! A new and improved “Turbo-Fan” Impeller is larger and provides more CFM. The 1 micron canister is self cleaning. Every time the unit is turned off a signal is sent to the canister motor that activates the cleaning “flappers” inside the canister! The quick connect steel collection drum is on wheels and makes disposing of collected waste faster and easier! The JDS 2 HP Cyclone is the ultimate dust collector. Compact size, powerful performance, and quiet operation make it the perfect choice for discriminating woodworkers. The 2 HP Cyclone stands only 61 inches tall. Our new and improved “Turbo-Fan” Impeller design provides 1700 CFM of maximum airflow. This model is ideal for shops with a limited ceiling height. The JDS Cyclones have a one micron efficient canister to ensure that fine dust doesn’t get back into the shop. The self cleaning canister filter is equipped with its own motor that automatically turns on when the cyclone is turned off. The unique cleaning system keeps the canister working at its peak performance for years. If you are looking for great performance and features in a cyclone collector that will fit into your shop, JDS 14059 Cyclone 2100-CK look to the JDS Cyclones.

153243 Features: -Wet Cutting Tile Saw MK-101 Pro-24. -Fully enclosed high torque, fan-cooled motor. -Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. -Has a three-position motor post and a two-position cutting head for convenient cutting of various tile sizes. -Built-in water distribution system supplies water to both sides of blade. -Variable height cutting head allows for plunge cuts and use of blades smaller than 10” in diameter. -Accommodates 6” and 8” profile wheels. -Micro V-belt drive. -Blade shaft lock for easy blade removal. -Linear-bearing and chrome plated guide-bar assembly ensure precise cutting. -Cast aluminum blade guard and motor post. -One-piece reinforced zinc-plated steel frame. -CSA Approved. -Motor available in other electrical configurations. Specifications: -Item # MK Diamond MK-101 153243. -Motor: Electric (Baldor). -Power: 2 HP, 120V. -Blade RPM: 3450. -Blade Capacity: 10”. -Arbor Size: 5/8”. -Depth of Cut: 3-3/4”. -Length of Cut: 24”. -Diagonally Cuts: 18” Tile. -Dimensions: 41” L x 22” W x 23” H. -Shipping Method: Truck. -One year limited warranty. -Weight: 176 lbs.

Powered by a 1.5-horsepower, single-phase, 115/230-volt motor, the Powermatic 64A features a left-tilting arbor that lets the user tilt Powermatic 1791228K Model 64 the blade away from the fence, eliminating the need for a sacrificial fence and reducing the risk of the work piece binding under the blade.

It also comes complete with a beveled, front edge to facilitate smooth transitions of the miter gauge as it moves over the edge of the table.

No matter the size or thickness of the work piece, the Powermatic 64A’s exclusive 3VX belt offers increased efficiency–especially when compared to standard belts–and less vibration for smooth operation. And when dealing with wider stock, users will appreciate the T-slot miter gauge with positive stops.